2017 DEERE 750K XLT DOZER

USED DEERE 750K XLT DOZER WITH ONLY 3300HRS! UNIT IS EQUIPPED WITH A TIER 4 FINAL DEERE ENGINE, FORESTRY KIT, MS RIPPER, CAB HEAT/AC, HEATED SEAT, PAT BLADE, AND 24″ PADS. UC HAS ONLY 330HRS. RUNS GREAT!

MACHINE SPECIFACATIONS:

Engine

750K XLT

750K LGP

750K

Blade Type

Power/Angle/Tilt (PAT)

Outside Dozer Blade (OSD)

Manufacturer and Model

John Deere PowerTech™ PVX 6068

John Deere PowerTech PVX 6068

Non-Road Emissions Standard

EPA Interim Tier 4/EU Stage IIIB

Displacement

6.8 L (414 cu. in.)

SAE Net Rated Power

116 kW (155 hp) at 1,800 rpm

123 kW (165 hp) at 1,800 rpm

Net Peak Torque

720 Nm (531 lb.-ft.) at 1,400 rpm

768 Nm (567 lb.-ft.) at 1,400 rpm

Aspiration

Turbocharged with charge air cooler

Air Cleaner

Vacuum-aspirated dual-element dry
canister

Cooling

750K XLT / 750K LGP / 750K

Type Variable-speed suction fan with automatic reversing

Engine Coolant Rating

–37 deg. C (–34 deg. F)

Engine Radiator

10 Ɵns per in.

Powertrain

750K XLT

750K LGP / 750K

Transmission Automatic, dual-path, hydrostatic drive; load-sensing feature automatically adjusts speed and power to match changing load conditions; each individually controlled track is powered by a variable-displacement piston pump and motor combi- nation; ground-speed selection buttons on single-lever steering and direction control; independently selectable reverse speed ratios of 100% ,115%, or 130% of forward ground speed; decelerator pedal controls ground speed to stop

System Relief Pressure 45 850 kPa (6,650 psi) 45 850 kPa (6,650 psi)

Travel Speeds

Forward and Reverse 9.7 km/h (6.0 mph) 9.7 km/h (6.0 mph)

Maximum (optional) 11.0 km/h (6.8 mph) 11.0 km/h (6.8 mph)

Steering Single-lever steering, speed, direction control, and counterrotation; full power turns and inƟnitely variable track speeds
provide unlimited maneuverability and optimum control; hydrostatic steering eliminates steering clutches and brakes

Final Drives Double-reduction, planetary Ɵnal drives mounted independently of track frames and dozer push frames for isolation from
shock loads

Total Ratio 46.41 to 1 46.41 to 1

Drawbar Pull

Maximum 245 kN (55,000 lb.) 245 kN (55,000 lb.)

At 1.9 km/h (1.2 mph) 147 kN (33,000 lb.) 156 kN (35,000 lb.)

At 3.2 km/h (2.0 mph) 93 kN (21,000 lb.) 98 kN (22,000 lb.)

Powertrain (continued) 750K XLT / 750K LGP / 750K

Brakes

Service Hydrostatic (dynamic) braking stops the machine whenever the direction-control lever is moved to neutral or the decelerator is
depressed to the detent

Parking Exclusive spring-applied, hydraulically released park brake feature engages wet, multiple-disc brakes automatically whenever the engine stops, the operator depresses the decelerator pedal to the brake position, the unit is in neutral for 3 seconds (with detected motion), or the park-lock lever is in the park position; machine cannot be driven with brake applied, minimizing wear-
out or need for adjustment

Hydraulics 750K XLT / 750K LGP 750K

Blade Type PAT OSD

Type Load sense hydraulic system with variable-displacement piston pump Load sense hydraulic system with
variable-displacement piston pump

Pump Displacement 63 cc 63 cc

System Relief Pressure 24 993 kPa (3,625 psi) 24 993 kPa (3,625 psi)

Differential Pressure 1896 kPa (275 psi) 1896 kPa (275 psi)

Maximum Flow at Unloaded High Idle 138 L/m (36 gpm) 138 L/m (36 gpm)

Control 3-function hydraulic-pilot T-bar joystick with push-button angle function 2-function hydraulic-pilot T-bar joystick

Electrical 750K XLT / 750K LGP / 750K

Voltage 24 volts

Battery Capacity 950 CCA

Reserve Capacity 190 min.

Alternator Rating

Cab 130 amp

Canopy 100 amp

Lights Grille mounted (2), rear mounted (2), engine compartment (1), and rear reƠectors (2)

Undercarriage 750K XLT 750K LGP 750K

Blade Type PAT PAT OSD

Tracks John Deere Dura-Trax™ features large deep-heat-treated, sealed, and lubricated track links and through-hardened, sealed, and lubricated rollers for maximum wear resistance; sprockets are segmented; extreme-duty shoes are available (on some models) for severe applications

Track Gauge 1880 mm (74 in.) 2134 mm (84 in.) 1880 mm (74 in.)

Grouser Width 560 mm (22 in.) 865 mm (34 in.) 560 mm (22 in.)

Chain Sealed and lubricated Sealed and lubricated Sealed and lubricated

Shoes, Each Side 45 45 40

Track Rollers, Each Side 8 8 7

Track Length On Ground 3073 mm (121 in.) 3073 mm (121 in.) 2591 mm (102 in.)

Ground Contact Area 34 344 cm² (5,323 sq. in.) 53 077 cm² (8,227 sq. in.) 28 957 cm² (4,488 sq. in.)

Ground Pressure 44.5 kPa (6.46 psi) 31.5 kPa (4.57 psi) 52.9 kPa (7.67 psi)

Track Pitch 191 mm (7.5 in.) 191 mm (7.5 in.) 191 mm (7.5 in.)

Oscillation at Front Roller

± 1135 mm (± 5.3 in.)

± 127 mm (± 5.0 in.)

± 110 mm (± 4.3 in.)

Operator Station

750K XLT / 750K LGP / 750K

ROPS (ISO 3471 – 2008) and FOPS (ISO 3449 – 2005)

Serviceability

ReƟll Capacities

Fuel Tank with Lockable Cap 356 L (94 gal.)

Cooling System with Recovery Tank 36.4 L (9.6 gal.)

Engine Oil with Filter 24.6 L (6.5 gal.)

Transmission Reservoir with Filter 106 L (28 gal.)

Hydraulic Reservoir and Filter 106 L (28 gal.)

22
23

Operating Weights

750K XLT

750K LGP

750K

Blade Type

PAT

OSD

Base Weight (with standard equipment, rollover protective structure [ROPS], full fuel tank, and 79-kg [175 lb.] operator)

15 593 kg (34,377 lb.)

17 053 kg (37,595 lb.)

15 611 kg (34,416 lb.)

Optional Components

Cab with Pressurizer and Heater/Air
Conditioner

337 kg (743 lb.)

Heater (ROPS canopy)

39 kg (85 lb.)

Front and Door Screens

ROPS Canopy

84 kg (186 lb.)

Cab with Air Conditioner

79 kg (175 lb.)

Rear Screen

ROPS Canopy

23 kg (50 lb.)

Cab with Air Conditioner

34 kg (75 lb.)

Side Screens

ROPS Canopy

44 kg (98 lb.)

Cab with Air Conditioner

54 kg (120 lb.)

Condenser Guard (cab with air conditioner)

55 kg (121 lb.)

Limb Risers (ROPS canopy and cab)

261 kg (575 lb.)

Heavy-Duty Grille

28 kg (62 lb.)

Lift-Cylinder Hose Guards

42 kg (93 lb.)

77 kg (170 lb.)

Tank Guards

323 kg (712 lb.)

Rear Counterweight

326 kg (720 lb.)

Retrieval Hitch

37 kg (81 lb.)

Drawbar, Extended Rigid

130 kg (286 lb.)

Blade Brush Guard

87 kg (192 lb.)

Center Chain Guides

61 kg (135 lb.)

Full-Length Rock Guards

154 kg (340 lb.)

174 kg (384 lb.)

Track Shoes

560-mm (22 in.) Moderate Duty

In base

—

In base

560-mm (22 in.) Extreme Duty

134 kg (296 lb.)

—

119 kg (263 lb.)

610-mm (24 in.) Moderate Duty

140 kg (309 lb.)

—

125 kg (275 lb.)

610-mm (24 in.) Extreme Duty

289 kg (637 lb.)

—

257 kg (566 lb.)

710-mm (28 in.) Moderate Duty

—

– 418 kg (– 922 lb.)

—

865-mm (34 in.) Moderate Duty — In base —

Machine Dimensions

Blade Type PAT PAT OSD

A Overall Height to Roof 3077 mm (10 ft. 1 in.) 3077 mm (10 ft. 1 in.) 3077 mm (10 ft. 1 in.)

B Tread Depth with Single-Bar Grouser

Moderate Duty 56 mm (2.2 in.) 56 mm (2.2 in.) 56 mm (2.2 in.)

Extreme Duty 69 mm (2.7 in.) 69 mm (2.7 in.) 69 mm (2.7 in.)

C Ground Clearance in Dirt 356 mm (14 in.) 356 mm (14 in.) 356 mm (14 in.)

D Overall Length 4921 mm (16 ft. 5 in.) 5246 mm (17 ft. 3 in.) 4937 mm (16 ft. 2 in.)

E Length with Extended Drawbar 5210 mm (17 ft. 1 in.) 5535 mm (18 ft. 2 in.) 5226 mm (17 ft. 2 in.)

F Blade Lift Height 1025 mm (40.3 in.) 1025 mm (40.3 in.) 1050 mm (41.3 in.)
H Blade Cutting-Edge Angle, Adjustable 55.2 to 60.1 deg. 55.2 to 60.1 deg. 50.5 to 60.0 deg.

G Blade Digging Depth 650 mm (25.6 in.) 650 mm (25.6 in.) 575 mm (22.6 in.)

Machine Dimensions (continued)

750K XLT

750K LGP

750K

Blade Type

PAT

OSD

Cut Reach

Width Over Track

Semi-U

I Blade Width — — 3251 mm (128 in.) (10 ft. 8 in.)

J Blade Height — — 1240 mm (48.8 in.) (4 ft. 8 in.)

SAE Capacity — — 4.3 m³ (5.6 cu. yd.)

Weight — — 1163 kg (2,564 lb.)

Push-Beam Assembly Weight (without blade)

— — 1470 kg (3,242 lb.)

M Blade Tilt — — 711 mm (28 in.)

O Width Over Track — — 2438 mm (96 in.) (8 ft. 0 in.)

Straight

I Blade Width

3296 mm (130 in.) (10 ft. 10 in.)

3962 mm (156 in.) (13 ft. 0 in.)

—

J Blade Height

1194 mm (47 in.) (3 ft. 11 in.)

1170 mm (46.1 in.) (3 ft. 10.1 in.)

—

SAE Capacity

2.2 m³ (4.2 cu. yd.)

3.8 m³ (5.0 cu. yd.)

—

Weight

937 kg (2,066 lb.)

1081 kg (2,383 lb.)

—

C-Frame Assembly Weight (without blade)

1318 kg (2,905 lb.)

—

K Blade Angle

23.5 deg.

—

L Overall Width with Blade Angled

3020 mm (118.9 in.) (9 ft. 10.9 in.)

3631 mm (142.9 in.) (11 ft. 10.9 in.)

—

M Blade Tilt (uses tilt jack)

437 mm (17.2 in.)

524 mm (20.6 in.)

—

N Cut Reach

108 mm (4.3 in.)

84 mm (3.3 in.)

—

O Width Over Track

2438 mm (96 in.) (8 ft. 0 in.)

2997 mm (118 in.) (9 ft. 10 in.)

—

P Cast Reach

224 mm (8.8 in.)

297 mm (11.7 in.)

—

Rear Ripper

750K XLT / 750K LGP / 750K

Multi-shank (3) parallelogram ripper with hydraulic pitch adjustment and ESCO® ripper tips

Weight 1690 kg (3,725 lb.)

Q Maximum Penetration 686 mm (27 in.)

R Maximum Clearance Under Tip 686 mm (27 in.)

S Overall Length, Lowered Position 1689 mm (67 in.)

S^| Overall Length, Raised Position 1448 mm (57 in.)

T Overall Beam Width 2134 mm (7 ft. 0 in.)

U Slope Angle (full raise) 22 deg.

V Ripping Width 1880 mm (6 ft. 2 in.)

W Distance Between Shanks 902 mm (36 in.)

916-933-6050

916-933-6050

2017 DEERE 750K XLT DOZER

Price $199,000

Call Today: 916.933.6050

Short Description

FEATURES:

Long Description